Clear-span aluminium marquees made to the width and length you need. With no centre poles, the full floor area stays open for stages, seating, catering and exhibition stands.
Majlis and Ramadan tents built to take a full interior fit-out, including carpets, seating, lighting and air conditioning, so guests stay comfortable all year round.
Elegantly finished tents with options for glass walls, draped linings, flooring and lighting, manufactured to suit celebrations from intimate gatherings to large receptions.
Heavy-duty, wide-span structures for storage, logistics and site use. They go up quickly, can be relocated, and are a cost-effective alternative to permanent buildings.
25
Design, fabrication and installation are handled by a single team, so you deal with one point of contact from brief to handover.
Clear-span aluminium marquees manufactured to the width and length you specify, with wall, flooring and lining options for weddings, exhibitions and corporate launches.
Traditional-style tents built to receive a full interior fit-out, including carpets, seating, lighting and air conditioning for year-round comfort.
Wide-span, high-eave structures for storage and logistics, with sandwich-panel or steel-sheet walls and floors designed for forklift traffic.
The classic, cost-effective choice. Versatile and available in spans from 5 m to 50 m.
A modern curved roof that feels taller inside and offers improved resistance to wind.
High-peak tents suited to reception areas, catering points and majlis entrances.
Large internal volume for arenas, concerts, hospitality pavilions and hangar-style uses.
Whether you need a single majlis tent or a large industrial shelter, you get the same engineering discipline and the same dedicated team.
Engineering, manufacturing, delivery and installation are coordinated by the same team, which keeps timelines tight and communication simple.
Every structure is sized to your site and your guest or storage requirements, with spans from 5 m up to 50 m available.
Aluminium 6061/T6 frames and flame-retardant PVC covers rated to DIN 4102 B1 form the core of every build.
Our team is on hand for permits, site questions and adjustments, both before and after your tent goes up.
B1
Fire-Rated
PVC Covers
The main frame is made from hard-pressed extruded aluminium. It is light enough to transport and erect quickly, strong enough for long spans, and it does not rust.
Roof covers of 850 GSM blockout PVC are waterproof, UV resistant and flame retardant to DIN 4102 B1, which helps the interior stay cooler through peak summer.
Without centre poles, the whole floor is usable, whether you are setting out banquet tables, a stage or industrial racking.
| Feature | Standard Event Tent | Industrial Series |
|---|---|---|
| Roof Cover | 850 GSM Blockout PVC | 650 - 850 GSM (White / Translucent) |
| Span Width | 10 m / 15 m / 20 m / 30 m | 20 m / 30 m / 40 m / 50 m |
| Eave Height | 3 m - 4 m | 4 m - 6 m (for racking) |
| Wind Load | 80 - 100 km/h | 100 - 120 km/h |
| Fire Rating | DIN 4102 B1, M2 | DIN 4102 B1, M2 |
| Wall Options | Glass / PVC / ABS Hardwall | Sandwich Panel / Steel Sheet |
| Flooring | Wooden Platform / Cassette | Heavy Duty / Concrete Anchors |
A tent is only as useful as its interior. Alongside the structure we can supply the services that keep it comfortable and safe on desert sand or hard ground.
Package AC units with ducting, sized to the tent, keep the interior comfortable through the Dubai summer.
Raised cassette flooring for events, or heavy-duty sub-floors for forklift traffic.
Chandeliers, truss lighting, emergency exit lighting and power distribution.
Glass entrance doors and fire-rated emergency exit doors.
We discuss the purpose, guest numbers or storage needs, then visit the site to measure ground levels and check access.
You receive drawings and a 3D layout showing the structure, interior arrangement, AC and lighting positions.
Frames and covers are fabricated to the approved design and checked before they leave for site.
Our crew delivers and erects the structure, completes the fit-out and hands it over ready to use.
Garden marquees, Ramadan tents and event extensions.
Exhibitions, festivals and brand activations.
Majlis, national events and public gatherings.
Temporary storage and overflow capacity.
Site shelters, workshops and material storage.
Pavilions, hospitality areas and spectator cover.
Dubai
Abu Dhabi
Sharjah
Ajman
Umm Al Quwain
Ras Al Khaimah
Fujairah
Al Ain
Ordering a custom tent involves sizing, materials and permits. Here are the questions we hear most often.
Modern Shade designs, fabricates and installs tent structures. You can order a custom-built structure and have the same team deliver, erect and fit it out.
Yes. Structures are made to measure, with spans from 5 m to 50 m. Send us your site dimensions and intended use and we will propose a suitable layout.
Frames are made from 6061/T6 aluminium, and roof covers are waterproof, UV-resistant PVC that is flame retardant to DIN 4102 B1.
Yes. We assist with the permits required from Dubai Municipality, DTCM for events, and Civil Defense, so your structure meets UAE safety requirements.
A standard 20 x 30 m event tent is typically erected in one to two days, while larger industrial structures take three to five days. Contact us for a schedule for your project.
For short-term events, see our event tent hire service, or contact us to discuss a purpose-built structure.
Tell us the size, purpose and location, and our team will prepare a tailored proposal and quotation.